CLOSE
FREE SHIPPING
ON ORDERS OVER $59*
DOMESTIC, UNDER 10 LBS
Home  >  Sales Rack - Clearance Center  >  TENS Electrodes by BodyMed 2 in Round, White Mesh Backed - 4 Pads NPP618
UPC: 815802010184
Code: bodymed-01018

TENS Electrodes by BodyMed 2 in Round, White Mesh Backed - 4 Pads NPP618

TENS Electrodes by BodyMed 2 in Round, White Mesh Backed - 4 Pads NPP618
Click To Enlarge


Retail Price: $6.99
Your price: $6.95
Currently Unavailable. Check back soon.
Important: NOTE: Product and/or packaging may differ from picture shown Product May be shown with optional accessories that are not included
SAME DAY SHIPPING
HASSLE FREE RETURNS
100% SECURE
  • Description
  • Directions
  • Warnings
  • Other
  • Disclaimer
  • More

Don’t be square, purchase these round BodyMed electrodes!

TENS Electrodes by BodyMed 2" Round, White Mesh Backed
For use with TENS Unit Nerve Stimulators and Electric Muscle Stimulators

These TENS Electrodes offers the highest quality of reusable gel on the market. Since the Electrode Pads are pre-gelled, simply place them on the area, and when finished, place them back on the electrode pad (included). The better you care for the electrodes, the longer they will last.

Carbon electrodes for use with TENS Units and Muscle Stimulators.

  • Flexible solid-carbon pad for maximum charge delivery and comfort
  • Re useable Gel
  • White Cloth-Mesh backing for comfort and flexibility
  • Molded wire connector for reliability and durability

Quality TENS Electrodes means less replacement costs down the line. OTCWholesale carries the some of the very best TENS Electrode on the market. High Quality Electrode Pads will save you money in the long run by providing you with multiple use - For multiple treatments - before replacing. Prolong the life of your TENS Unit Electrodes by purchasing Pre-TENS Conductive Gel and Post-Treatment TENS Lotion, or get everything you need in our TENS Accessories Kit!

Questions: Manufacturer 1-800-409-2848 or www.BodyMedproducts.com

 

Directions:

  1. Apply only to unbroken skin
  2. Clean and dry the area to which the TENS Electrodes are to be applied with soap and water prior to application of the Electrode Pads.
  3. Plug the lead wire into the Pin Connector on the pre-wired electrode pad.
  4. To apply to the skin: remove the protective liner from the TENS Electrode and apply to the prescribed location.

REMOVAL

  1. To remove: Lift the corner of the electrode pad and peel holding both the back of the TENS Electrode and the edge of the adhesive.
  2. Place the TENS Unit Electrodes on glossy side of storage card and remove the lead wires by twisting and pulling at the same time.
  3. Clean the skin with soap and water after removal. Repeated application may be improved by washing the adhesive for one second under cold running water and allowing to air dry (do not heat it). Over saturation with water will reduce the adhesive properties of the electrode pad. Or moisten skin with tap water and allow 1 minute for the adhesive to anchor to the skin before putting any tension on the lead wire attached to the electrode.

Warnings:

  • The electrode pads are intended for use by one patient only. Do not share TENS Unit Electrodes.
  • Adjust stimulator according to stimulator and health professional instructions for your treatment.
  • Do not apply to broken skin. If rash or skin irritation occurs, discontinue use and contact your physician. Do not use while driving a motorized vehicle, or operating machinery. Do not exceed 0.1 watts.
  • Federal Law restricts this device to sale by, or on the order of, a physician or other licensed practitioner. Use a neurostimulator approved for distribution within the USA.

Other Information:

Do's and Don'ts for TENS Electrode Removal

Do: Peel electrode pad from liner or skin by lifting at any corner.

Don't: Pull on the wire at any time for removal.

  1. When removing electrode pads from the liner, peel up by any corner.
  2. Save original liner and packaging for storage of tens electrodes.
  3. When treatment is done, remove electrode pad from the skin by again peeling up from any corner.
  4. Place tens unit electrodes back on original liner and in original packaging.

If electrode gel would seem dry, add just a few drops of water on the gel.

BodyMed
Hudson, OH 44236
©BodyMed www.BodyMedproducts.com

Product Reviews

Directions:

  1. Apply only to unbroken skin
  2. Clean and dry the area to which the TENS Electrodes are to be applied with soap and water prior to application of the Electrode Pads.
  3. Plug the lead wire into the Pin Connector on the pre-wired electrode pad.
  4. To apply to the skin:remove the protective liner from the TENS Electrode and apply to the prescribed location.

REMOVAL

  1. To remove: Lift the corner of the electrode pad and peel holding both the back of the TENS Electrode and the edge of the adhesive.
  2. Place the TENS Unit Electrodes on glossy side of storage card and remove the lead wires by twisting and pulling at the same time.
  3. Clean the skin with soap and water after removal. Repeated application may be improved by washing the adhesive for one second under cold running water and allowing to air dry (do not heat it). Over saturation with water will reduce the adhesive properties of the electrode pad. Or moisten skin with tap water and allow 1 minute for the adhesive to anchor to the skin before putting any tension on the lead wire attached to the electrode.

Warnings:

  • The electrode pads are intended for use by one patient only. Do not share TENS Unit Electrodes.
  • Adjust stimulator according to stimulator and health professional instructions for your treatment.
  • Do not apply to broken skin. If rash or skin irritation occurs, discontinue use and contact your physician. Do not use while driving a motorized vehicle, or operating machinery. Do not exceed 0.1 watts.
  • Federal Law restricts this device to sale by, or on the order of, a physician or other licensed practitioner. Use a neurostimulator approved for distribution within the USA.

Other Information:

Do's and Dont's for TENS Electrode Removal

Do: Peel electrode pad from liner or skin by lifting at any corner.

Dont: Pull on the wire at any time for removal.

  1. When removing electrode pads from the liner, peel up by any corner.
  2. Save original liner and packaging for storage of tens electrodes.
  3. When treatment is done, remove electrode pad from the skin by again peeling up from any corner.
  4. Place tens unit electrodes back on original liner and in original packaging.

If electrode gel would seem dry, add just a few drops of water on the gel.

The product information contained in this document, including the product images and additional product materials, was collected from various supplier sources. All product claims and specifications are those of the product suppliers and have not been independently verified by OTC Wholesale, LLC or its affiliates (“OTC Wholesale”). OTC Wholesale is not responsible for errors or omissions in the product information.

The properties of a product may change or be inaccurate following the posting or printing of the product information in the document, either in the print or online version. Caution should be exercised when using or purchasing any products from OTC Wholesale’s online or print documents by closely examining the product packaging and the labeling prior to use.

Due to product changes, information listed in this document is subject to change without notice. This information is placed solely for your convenience in ordering and OTC Wholesale disclaims all responsibility for its completeness and accuracy, whether or not the inaccuracy or incompleteness is due to fault or error by OTC Wholesale.

YOU MAY ALSO LIKE
Shopper Award
otcwholesale.com has a Shopper Approved rating of 4.8/5 based on 1938 ratings and reviews

Transcutaneous Electrical Nerve Stimulation (TENS)

TENS is a non-invasive, drug free method of controlling pain, which uses tiny electrical impulses sent through the skin to nerves in order to modify your pain perception. In most people it is effective in reducing or eliminating the pain.

Electronic Muscle Stimulation (EMS)

EMS works by sending electronic pulses to the muscle(s). This is achieved by sending low frequency electric pulses through muscle tissue causing them to gently contract. In this way the muscles are passively exercised and blood flow is increased

Galvanic Stimulators

Galvanic Stimulators use direct current, which creates an electrical field over the treated area. The positive pad works like ice, causing reduced circulation to the area under the pad. The negative pad works like heat, causing increased circulation.

Interferential

IF sends small comfortable electrical impulses through your skin to work on deeper tissue stimulation. The sensation works to prevent pain signals from reaching the brain.

Infrared

Infrared Light Therapy help the body by delivering specific light waveforms that increase circulation. Increasing circulation helps promote healing, lessen swelling, and helps in reducing pain.

Ultrasound

Portable Ultrasounds give advanced pain relief using sonic stimulation of soft tissue cells. They generate pulsed, high frequency sound waves, which travel deep into the tissue, generating vasodilation. This helps increase blood flow to the treated area.

Russian

Russian stimulation uses medium frequencies to provide stimulation to muscle groups. This is used to reduce muscle spasms as well as for muscle strengthening. This method was created to produce maximal muscle strengthening effects.

Micro Current

Microcurrent Therapy uses extremely small amounts of electrical current (millionths of an amp) to help relieve pain and heal soft tissues of the body. The electrical current used in Microcurrent Therapy is so small that it is rarely felt.